Forklift Attachments Elk Grove - Without forklift attachments, many jobs would be difficult, if not impossible. The wide range of forklift attachments make most jobs not only possible but also safer and quicker. Besides regular forklift training, operators also need to undergo proper training for every attachment they will be using.
There are many non-hydraulic attachments and hydraulic attachments available for forklift attachments. They provide many benefits including decreasing fuel consumption, time, man-power, damage to stock and employee accidents.
Equipment Considerations
Forklift attachments can replace existing attachments or may be added to a machine that doesn’t already have one. Various considerations need to be taken prior to adding or replacing any forklift attachment. These considerations include the kind of forklift, the machine’s capacity, the number of hydraulic functions required to power the attachment’s and the type of carriage.
Failing to take these aforementioned factors into consideration can create extra safety hazards and risks for the operator, the forklift, its’ attachments and the stock. Extra safety factors must be considered which will be discussed in more detail.
Forklift Rating and Re-Rating
These machines are provided with lift capacity ratings from the manufacturer that need adjusting when changing or adding any forklift attachments. Manufacturers of forklift attachments usually offer calculators available online to estimate the safe lifting capacity when using a particular attachment. It is important to note that only the forklift manufacturer can provide accurate lifting capacities.
The first step before installing any attachment is to get in touch with the authorized local forklift dealer to request that that forklift brand is re-rated accordingly with the attachment. Once the forklift manufacturer has re-rated the machine, it will ideally have a new specification plate that is factory authorized. This new specification plate will replace the original plate and should be installed showing the new rating for the forklift.
Equipment Upgrades
It is vital to note when working with forklift attachments the equipment’s hydraulic function consists of a forklift valve that has a lever located near the operator which creates two areas for pressurized hydraulic passages for oil. While not all forklift attachments are hydraulic, hydraulic attachments often include more features than the forklift has valves. In this circumstance, it is common to add one or more valves as needed. There are several methods of adding a valve. The manufacturers of forklifts create accessories to simplify hose and valve routing. There are plenty of labor and parts involved which can be costly enough to make this an impractical solution. Other options include adding a cable reel and a hose in conjunction with a solenoid valve to divert oil from an existing location. However, the operators’ view may be compromised due to the cable reels and hose installation. These parts also may be easily damaged by their location. There are kits available that use a solenoid valve and specialty hoses that allow for the reinforced braid to double as an electrical conduit. These hoses are designed to replace existing ones and stay free from being damaged. The operator can enjoy a clear view with this option.
Safety Considerations
Proper training must be obtained prior to fitting any forklift attachment. The operator needs to be able to remove, fit and operate the attachment.
Two important safety factors must be considered before the use of any forklift attachment.
Firstly, it is important to note that any kind of forklift attachment will reduce the machine’s nominal load rating. The nominal load rating is determined with forks and a stock fork carriage. It is important to note that the real load rating may be significantly lower.
Second, the center of gravity will be affected by the use of any forklift attachment. Obviously, the stability of the forklift is reduced. Since the attachment’s weight is prominent in front of the fulcrum point on the forklift, the operator needs to drive the machine as though it is partially loaded even before it is carrying a load. Thus, when using any attachment, an operator should travel at a slow speed and make turns slowly and gently. Check the forklift’s capacity to ensure that every attachment is listed on the data plate.
Specific safety checks must be made prior to using each forklift attachment. The attachment must be:
1. Appropriate for the specific forklift being used;
2. Appropriate for the specific load;
3. Attached correctly;
4. Properly locked; and
5. Permitted on the forklift’s data plate.
List of Common Forklift Attachments
Below is a list of popular forklift attachments and their general uses. There are numerous forklift attachments and this list will cover the most popular. The variety of attachments can drastically increase efficiency for many jobs.
SIDESHIFTER:
The sideshifter enables the forklift to move laterally for easier load placement without having to reposition the entire machine.
FORK POSITIONERS:
The fork positioners adjust for different loads by moving the forks together or apart in relation to each other.
DIMENSIONING DEVICES:
Provide dimensions for the cargo allowing for more efficient use of warehouse and truck trailer space and often used in conjunction with billing systems based on volume.
ROTATOR:
A rotator helps to straighten tilted skids and handle custom load requirements and fast unloading. Many attachments include a rotator feature.
ROLL AND BARREL CLAMP:
The roll and barrel clamp simplifies grasping rounded loads such as barrels. It has numerous pressure settings for handling fragile items with less damage potential. This attachment often has a rotate function to change the load from a vertical to a horizontal position.
CARTON AND MULTIPURPOSE CLAMP:
The carton and multipurpose clamp has pressure settings and is used for handling more squared shaped loads. It easily masters boxes, bales and cartons.
POLE ATTACHMENTS:
Pole attachments are placed where the forks would normally be and are used for transporting carpet and rolled up linoleum.
SLIP SHEETER OR PUSH-PULL:
Slip sheeter or push-pull attachment lets the operator move slip sheets with a clamping option instead of pallets. It can pull the slip sheet onto thin and wide metal forks to facilitate pushing or loading. The attachment variations include “Save,” where the slip sheet is removed to be used again or “Standard.”
DRUM HANDLER:
The drum handler is built for holding drums. It may have arms that encompass the drum for transporting or it may feature a spring-loaded jaw to grip the drum’s top lip.
DRUM AND STORAGE BIN TIPPER:
The drum and storage bin tipper helps to transfer loose or liquid items into other containers.
MAN BASKET:
The lift platform known as a man basket is designed to transport workers vertically. It is outfitted with brackets and railings to anchor safety harnesses.
TELESCOPIC FORKS:
The telescopic forks are used in locations with a two pallet stacking design were one shelf is placed right behind another with no aisle between them.
SCALES:
Scales are helpful for allowing operators to transport pallets while weighing them. This stops the need for interrupting work with regular travel to the scales. It can be used in legal-for-trade weights for operations that bill by how much items weigh.
SINGLE-DOUBLE FORKS:
Allow movement of a single pallet or platform or two pallets side by side. With the correct attachment/s a single forklift can be used for multiple specialist materials handling tasks alongside normal lifting tasks, thus reducing the need for owning a specialist unit alongside a normal unit and the larger running and maintenance costs associated with multiple units.
SNOW PLOW:
Designed for snow removal and distribution but can also be used to move other types of loose material.
SKIPS:
Skips facilitate fast and safe removal of waste to the proper waste or skip compactor. Skips are either a bottom-emptying model or a roll-forward type.
BOOMS AND JIBS:
Jibs and boom offer extended forklift reach for transporting loads that are stacked deep or high or that are suspended. There are reach-over, low profile, precision lifting and extendable length options.
Forklift Attachment PDF
