In nearly all situations, most individuals spend quite a lot of money buying their forklift. Therefore, it is very essential to take proper care of it so as to protect your investment well into the long run. It is really a good idea to know the procedures that are undertaken in taking care of and maintaining this equipment.
One of the best ways to tell how good the engine is performing is by starting the lift truck up and listening carefully to see how it runs. Like for example, if there are any misses or knocks, the equipment is faulty and this must raise some issues. Furthermore listen carefully for any squealing noise which come from the belts as these noises will provide you with a wealth of information.
Several of the main parts requiring attention during maintenance comprise the safety warning devices, gauges, horn, the overhead guard and the lights. Any burnt out light bulbs or faulty parts must be replaced as soon as they are noticed. It is also essential to check the wiring.
The battery compartment terminals must be cleaned after the above components have been inspected thoroughly. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery should be inspected in order to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and then change the filters. The transmission filter, fuel filters and the hydraulic filter have to be replaced regularly. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
Once the oil change has been completed and new filters have been fitted, visually inspect the drive axle from underneath the machine. Be certain to grease the axle if there is any grease fitting. Inspect the belts on the engine for any frays or cracks. If you find any, fix the issue accordingly. After that, check each and every other part of the machine including the wheels. If any kind of problem or fault is detected, be sure to deal with it immediately so as to make certain the machinery is running at its safest and optimum levels.