Change a Propane Tank
Propane powered forklifts are commonly utilized in warehouses. The forklift is designed with the propane tank mounted at the rear of the operator. The tanks, that look much like beer kegs, have to be replaced from time to time because they have a limited lifespan. Forklift drivers must utilize care when handling propane tanks. Compressed gases are dangerous, particularly since the gas is flammable. Use care when replacing and removing propane tank to avoid injury.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn the tank valve off. The lift truck must be left on until the engine dies. This procedure burns the gas off in the transfer hose which connects the tank and the engine. Before taking the second steps, wear the proper safety equipment, such as insulated gloves made of either neoprene or leather. It is essential for you to protect your skin from touching the compressed gas, that is extremely cold.
2 The tank hose has to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, reconnect the holding straps and reconnect the hose at the valve of the tank by tightening the nut.
3 You can check for leaks by applying soapy water to the valve and slightly opening it. Leaking gas would cause bubbles to froth around the value. If this occurs, inspect the valve area and the connection hose at the nut. The connecting nut should be re-tightened if you detect any leaks around the valve area, and after that perform the leak inspection procedure once more. Persistent leaks mean that both the nut and connecting hose should be replaced. Then again, if replacing the hose and nut still does not stop the leak, the tank will have to be replaced.
4 Open the valve all the way to allow the gas to fill the connecting hose. Afterward you can start the lift truck and resume working.