It is really essential to utilize extra caution when using a rough terrain scissor lift. Operators should be completely aware of the surrounding environment. Long booms on the machinery act as levers from the drive units center. Like for example, a 6 inch bump can lead to a 3 foot bounce when the operator is at the driver controls. Consider all other traffic nearby, as they might not be aware that you are moving. Plan your assent cautiously. Park the boom lift on a flat surface which has no water or mud. These areas conceal deep potholes that could be possibly cause the occupants to fall if the tires fell into the holes. If provided, utilize all of the outriggers, completely extended. Be certain to just use wooden chalk blocks which are approved.
Some lifts would operate from the end of the boom on a metal platform. Extended booms act levers on the drive unit. While you are at the driver controls, a 6-inch bump could result in a 3-foot bounce. Consider all other traffic. They might not know that you are moving. Plan your assent. Park the boom lift on a flat surface free of any mud or water. These areas could cover deep potholes wherein the lift tires can fall, tipping the occupants. Extend all outriggers, if provided, to the full extension position. Place just approved wooden chalk blocks under the outrigger pads in order to prevent the unit from moving.
A serious hazard for lift operators is overhead power lines. This is due no matter what type of lift is utilized. For example, if the driver of the platform is not being aware, or if the platform is being controlled by employees on the ground which can not accurately access proximity to wiring and thus, either the platform itself or the worker could be easily brought into contact with electrical wires. The employee might be electrocuted unfortunately unless correctly insulated.